Carrier-Grade Cable Ensures Transmission Quality
Superior cable assemblies ensure stable signal transmission and long-term reliability, minimizing failure rates.
1 / 7
Fiber Optic Cables · HD-OM4FPULCDX
30m (98ft) Fiber Patch Cable, 2 Fibers, LC UPC Duplex to LC UPC Duplex Flat Clip with Push-Pull Boot Uniboot, Multimode (OM4), Riser (OFNR), 2.0mm, Aqua
30m (98ft) Fiber Patch Cable, 2 Fibers, LC UPC Duplex to LC UPC Duplex Flat Clip with Push-Pull Boot Uniboot, Multimode (OM4), Riser (OFNR), 2.0mm, Aqua, Product Specification:Connector Type - US Conec Flat Clip with Push-Pull Boot LC to LC, Polish Type - UPC to UPC, Fiber Count - 2 Fibers, Fiber Grade - Bend Insensitive Fiber, Fiber Mode - OM4 50/125μm, Wavelength - 850/1300nm
Net price · DE
€77,00
ex. VAT
In stock
Fiber Patch Cable, 2 Fibers, LC UPC Duplex to LC UPC Duplex Flat Clip with Push-Pull Boot Uniboot, Multimode (OM4), Riser (OFNR), 2.0mm, Aqua
The uniboot design meets the high-density space requirements. Uniboot assemblies provide a single boot design integrated into the connector and clip design. This design allows one cable to carry two fibers, reducing cable congestion during routing, and combines modularity, flexibility, and ease of insertion and removal from connectivity. The bend insensitive fiber features ultrabendable performance, which can greatly reduce outages and degradations in systems caused by severe bending problems. Utilizing a convenient and sturdy push-pull boot, it can easily be inserted and removed from high-density cabling without special tooling. Its reverse-polarity design allows for quick and easy polarity conversion without exposing the fibers or needing any tools.
Highlights
- 01Uniboot Allows One Cable to Carry Two Fibers to Reduce Cable Congestion in High-Density Patch Fields
- 02Bend Insensitive Fiber with 7.5mm Min. Bend Radius
- 03DirectConec™ Push-Pull Boot for Effortless Insertion and Extraction
- 04Reverse Polarity without Exposing the Fibers or Needing Any Tools
- 05Termination Is Tested to Ensure Network Performance
- 06Designed for High-Density Fiber Cabling in Network Cabinet Connections, Ceiling Wiring and Under-Floor Wiring in a Data Center
- 07Support for Various Transmission Speed Ethernet Applications
Specifications
18 fields| Connector Type | US Conec Flat Clip with Push-Pull Boot LC to LC |
| Polish Type | UPC to UPC |
| Fiber Count | 2 Fibers |
| Fiber Grade | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Flame Rating | Riser (OFNR) |
| Cable Outside Diameter (OD) | 2.0mm |
| Polarity | A (Tx) to B (Rx) |
| Tensile Strength | 60/100N (Long/Short Term) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Insertion Loss | ≤0.2dB |
| Return Loss | ≥30dB |
| Attenuation at 850nm | ≤3.5dB/km |
| Attenuation at 1300nm | ≤1.5dB/km |
| Operating Temperature | -10 to 70°C (14 to 158℉) |
| Storage Temperature | -20 to 70℃ (-4 to 158℉) |
Features
Simple Polarity Reversible Function
The reverse polarity feature converts the cable from A-B to A-A safely and efficiently at either end of the cable without exposing the fiber to any contaminants or needing any tools.
Meet the Indoor High-Density Installation Needs
- The uniboot cables are ideal for high-density environments in minimizing waste, optimizing cable management, and speeding deployment for lower installation costs.