Custom Fiber Count
Fiber cable is available in various fibre counts with selection depending on the application and the number of connections.
1 / 6
Fiber Optic Cables · AM-XXMTPOM4
Customized MTP®-12 Armored Jumper, 8-144 Fibers, Multimode (OM4), 0.35dB Max
40/100G Base-12 Cabling System
Customized MTP®-12 Armored Jumper, 8-144 Fibers, Multimode (OM4), 0.35dB Max, Product Specification:Connector A - US Conec MTP® Elite Female/Male, Connector B - US Conec MTP® Elite Female/Male, Polish Type - UPC, Glass Fiber - Bend Insensitive Fiber, Fiber Mode - OM4 50/125μm, Wavelength - 850/1300nm
Net price · DE
€62,00
ex. VAT
In stock
1-year warranty · Netcore-backed
Customized MTP®-12 Armored Jumper, 8-144F, 0.35dB, OM4
Armored fibre optic cable with build-in metal armor can provide stronger protection of the optical fibres than standards fibre optic cables. The rugged armored cables allow optical fibre to be installed in the most hazardous areas, including environments with slight dust, oil, gas, moisture, or even damage-causing rodents and pests.
Due to the MTP®-12 also supporting MTP®-8 fibre systems, it is also ideal for 8-fibre parallel multimode optical transceiver applications, such as 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4 optics connection.
Due to the MTP®-12 also supporting MTP®-8 fibre systems, it is also ideal for 8-fibre parallel multimode optical transceiver applications, such as 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4 optics connection.
Highlights
- 01US Conec MTP® Connector with Optimal 0.35dB Low IL
- 02Bend Insensitive Fiber with 10mm Min. Bend Radius
- 03Helical Steel Armor Provides Additional Crush and Rodent Protection
- 04Available in 8, 12, 24, 36, 48, 72, 96 and 144 Fiber Counts
- 05Available in Plenum (OFNP) and LSZH Cable Jackets
- 06Available in Female (Non-Pinned) and Male (Pinned) Connectors
- 07Available in Type A, Type B, and Type C Polarities
- 08Typically Used for Routing Indoor Including Data Center Racks, Raised Floors and Runs Between Floors
Specifications
16 fields| Connector A | US Conec MTP® Elite Female/Male |
| Connector B | US Conec MTP® Elite Female/Male |
| Polish Type | UPC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Trunk Outside Diametre (OD) | 6.0mm-29.5mm |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Fiber Cords Structure | Single Armored, Stainless Steel Tube |
| Minimum Bend Radius | 10mm |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥27dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | Plenum (OFNP): -10 to 60°C (14 to 140°F)<br/>LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | Plenum (OFNP): -10 to 70°C (14 to 158°F)<br/>LSZH: -20 to 70°C (-4 to 158°F) |
Features
Custom Cable Jacket
Custom Connector
MTP® connectors utilise two alignment pins on one connector and two holes on the opposite connector. Female connectors can be identified by the two cable pins on the end of the connector.
Custom Polarity
Custom Pulling Eye
The pulling eye protects fibre trunk connectors during cable installation and removal, particularly in tight spaces or hard-to-reach spaces, by fully covering the breakout length and transferring pulling force from the assembly to the sleeve.