1 / 4
Optical Networking · FHD-MC082961EMB
8 Channels CWDM Mux Demux, 1290-1610nm, with Monitor and Expansion Port, 4.5dB Typical IL, LC/UPC, Single Fiber, Side-B, High Density, FHD™ Plug-in Module
FHD Plug-in Module | TFF | ITU-T
8 Channels CWDM Mux Demux, 1290-1610nm, with Monitor and Expansion Port, 4.5dB Typical IL, LC/UPC, Single Fiber, Side-B, High Density, FHD® Plug-in Module, Product Specification:Channel - 8 Channels, Wavelength - TX-1270, 1310, 1350, 1430, 1470, 1510, 1550, 1590nmRX-1290, 1330, 1370, 1450, 1490, 1530, 1570, 1610nm, Special Port - Monitor, Expansion Port, Technology - TFF (Thin Film Filter), Insertion Loss - ≤5.0dB, 4.5dB Typical, Channel Spacing - 20nm
Net price · DE
€284,00
ex. VAT
In stock
3-year warranty · Netcore-backed
8 Channels CWDM Mux Demux, 1290-1610nm, with Monitor and Expansion Port, 4.5dB Typical IL, LC/UPC, Single Fiber, Side-B, High Density, FHD® Plug-in Module
The 8CH Mux Demux, based on TFF (Thin Film Filter), is a passive CWDM device featuring high density, low loss, and short-haul transmission suitability. A 1% monitor port enables downtime-free troubleshooting, and an expansion port supports channel expansion. In addition, this unit can act as a Mux or Demux. It combines 8-channel of CWDM wavelengths into one composite signal and separates the combined CWDM signal into 8 individual wavelengths over a single-mode optical fibre. Compliant with the ITU-T G.694.2, it maximises the capacity of the C-band range. Designed for maximum configuration flexibility, the CWDM Mux Demux can plug directly into the FHD® chassis, each module occupying one slot.
It supports 1G/10G/25G Ethernet, SDH/SONET, 1/2/4/8/16G Fiber Channel, FTTx, and CATV. When deployed with FS CWDM optical transceivers, OEO and OADM modules, it seamlessly enables flexible network architectures ranging from simple point-to-point connections to amplified ring configurations.
It supports 1G/10G/25G Ethernet, SDH/SONET, 1/2/4/8/16G Fiber Channel, FTTx, and CATV. When deployed with FS CWDM optical transceivers, OEO and OADM modules, it seamlessly enables flexible network architectures ranging from simple point-to-point connections to amplified ring configurations.
Highlights
- 01Multiplexing of up to 8 Channels on Single Fiber to Maximize the Using of Existing Fiber
- 02Monitor Port Taps off 1% of the Signal to Monitor the Channel Power Levels
- 03Expansion Port for Adding Additional Channels and Increasing Capacity
- 04Hybrid C/DWDM System via 1530nm/1550nm for Additional DWDM Channels
- 05Enables Space-efficient Integration and Hybrid Deployment of CWDM, DWDM, LWDM, OWDM, FAP and MTP Cassettes within the FHD® Chassis
- 06Passive Transparent Multiplexing at Any Rate, Any Service, Including Ethernet, SDH/SONET, Fiber Channel, FTTx, and CATV
- 07Suitable for Short Distance Transmission, Commonly Used in Small and Medium-sized Networks
- 08Fit into One Slot of the FHD® 4-Slot 1U 19” Rack Chassis
Specifications
20 fields| Channel | 8 Channels |
| Wavelength | TX-1270, 1310, 1350, 1430, 1470, 1510, 1550, 1590nm<br/>RX-1290, 1330, 1370, 1450, 1490, 1530, 1570, 1610nm |
| Special Port | Monitor, Expansion Port |
| Technology | TFF (Thin Film Filter) |
| Insertion Loss | ≤5.0dB, 4.5dB Typical |
| Channel Spacing | 20nm |
| Channel Passband | ±6.5nm |
| Passband Ripple | ≤0.5dB |
| Return Loss | ≥45dB |
| Adjacent Channel Isolation | ≥30dB |
| Non-adjacent Channel Isolation | ≥40dB |
| Connector | LC/UPC |
| Polarization Dependent Loss | ≤0.3dB |
| Polarization Mode Dispersion | ≤0.1ps |
| Max Optical Power | ≤500mW (27dBm） |
| Directivity | ≥45dB |
| Temperature | Operating: -40 to 85°C (-40 to 185°F)<br/>Storage: -40 to 85°C (-40 to 185°F) |
| Dimensions (HxWxD) | 1.38''x4.29''x4.64'' (35x109x118mm) |
| Rack Space | 1U ¼-width Plug-in Module |
| Housing | Pluggable Module (Occupies 1 Slot in <a href="/de-en/products/70419.html?attribute=115021&id=4484715" >FHD® Chassis</a>) |
Features
Efficient and Economical Single-fibre Solution
Mix of Services Multiplexing at Any Rate
Flexible mix of 1G/10G/25G Ethernet, SDH/SONET, 1/2/4/8/16G FC, FTTx, and CATV, it's transparent to any rate, any service multiplexing and upgrade.
- Ethernet
- SDH/SONET
- FTTx
- Video Services
Monitor Port for Your Diversified Monitoring Needs
Expansion without Service Interruption
Higher Density Design to Meet Diversified Needs
CWDM Point-to-point Access Networking Solution
Custom Solution Tailored to Your Needs
- Increase Network Capacity
- <a href="/de-en/solution_design.html?resource=1" >Network Design</a> and Optimization
- Staging and Configuration Support