Custom Fiber Count
Fiber cable is available in various fibre counts with selection depending on the application and the number of connections.
1 / 7
Fiber Optic Cables · HD-XXMTPSMF
Customized MTP®-12 Push Pull Tab Jumper, 12-144 Fibers, Single Mode (OS2), LSZH Bunch, 0.35dB Max
Buy Customised 12-144 Fibres MTP-12 Trunk Single Mode OS2 9/125 HD BIF Fibre Optic Cable, LSZH at reliable MTP®/MPO fibre patch lead supplier-FS.COM.
Net price · DE
€76,00
ex. VAT
In stock
1-year warranty · Netcore-backed
Customized MTP®-12 Push Pull Tab Jumper, 12-144F, OS2, LSZH Bunch, 0.35dB
MTP® jumpers are high-density pre-terminated optical cabling that simplify installation and improve performance, designed to be a cost-effective alternative to time-consuming field termination. MTP® jumpers, allow for the seamless migration to higher data rates in the data centre when used in conjunction with our trunk cables. They are used to connect MTP® adapter panels, fibre cassettes, and electronics, typically within a cabinet and row.
Highlights
- 01US Conec MTP® Connector with Optimal 0.35dB Low IL
- 02G.657.A1 Bend Insensitive Fiber with 10mm Min. Bend Radius
- 03LSZH Flame Rating for Horizontal Structural Cabling Areas
- 04Available in 12, 24, 48, 72, 96 and 144 Fiber Counts
- 05Available in Female (Non-Pinned) and Male (Pinned) Connectors
- 06Available in Type A, Type B, and Type C Polarities
- 07Available in Pulling Eye to Prevent the Cables from Twisting During the Installation Process
- 08Typically Used for Patching Within a Cabinet and Row
Specifications
16 fields| Connector A | US Conec MTP® Push Pull Tab Female/Male |
| Connector B | US Conec MTP® Push Pull Tab Female/Male |
| Polish Type | APC |
| Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Trunk Outside Diametre (OD) | 3.0mm-17.3mm |
| Cable Jacket | LSZH |
| Connector Durability | 50 times |
| Minimum Bend Radius | 10mm |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | -10 to 70°C (14 to 158°F) |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Features
Custom Connector
MTP® connectors utilise two alignment pins on one connector and two holes on the opposite connector. Female connectors can be identified by the two cable pins on the end of the connector.
Custom Polarity
Custom Pulling Eye
The pulling eye protects fibre trunk connectors during cable installation and removal, particularly in tight spaces or hard-to-reach spaces, by fully covering the breakout length and transferring pulling force from the assembly to the sleeve.